| Table of Contents |
|---|
Also see Runbooks
firewalld/fapolicyd
It is recommended to disable firewalldandfapolicyd:
| Code Block |
|---|
systemctl disable firewalld --now systemctl disable fapolicyd.service |
nm-cloud-setup
If enabled, it is required to disable nm-cloud-setup and reboot the node:
| Code Block |
|---|
systemctl disable nm-cloud-setup.service nm-cloud-setup.timer reboot |
make sure noexec is not used for dedicated rancher partition
If you are using a dedicated partition (/var/lib/rancher) to run K3s make sure to NOT havemounted it using noexec flag inside /etc/fstab file.
...
check fips mode
If you have FIPS mode enabled is necessary to disable it otherwise some of our workloads running in K3s will crash at startup. To check if FIPS is enabled run:
| Code Block |
|---|
sysctl crypto.fips_enabled |
...
In Value of 1 means FIPS mode is enabled, in order to disable, please refer to the steps as mentioned in below article:
https://www.thegeekdiary.com/how-to-disable-fips-mode-on-centos-rhel-7/
...
How to disable FIPS in RHEL/CentOS
iptables
RHEL like systems have buggy version of iptables 1.8.4 which is causing issues with firewall, service routing and external network reachability as well as performance issues. It is required to configure k3s to use bundled version by modifying k3s service( same for k3s-agent service on worker nodes in HA deployments) file and adding --prefer-bundled-bin option to service’s cmd and restarting service.
| Code Block |
|---|
~$ cat /etc/systemd/system/k3s.service
ExecStart=/usr/local/bin/k3s \
server \
'--node-name=local-01' \
'--prefer-bundled-bin' \
~$ sudo systemctl daemon-reload
~$ sudo systemctl stop k3s
~$ sudo systemctl start k3s
~$ |
If this change is done on existing system reboot is recommended to clear duplicate iptables rules.
| Code Block |
|---|
~$ sudo reboot |
More details can be found here - https://docs.k3s.io/advanced#oldknown-iptables-versionsissues?_highlight=iptables&_highlight=bug#iptables